Did you know there is no limit as to what you can have printed on your floor graphics and stickers nowadays?

Look at this large branded basketball court logo floor graphic picture here.

Does this giant floor sticker look like an actual real hardwood court to you?

This special promotional court floor graphic was ordered, produced, and installed in less than 3 days.

The floor decal was used by a local Las Vegas automotive dealership to run a special promotion during last March’s basketball tournaments.

Pretty cool, huh?

And now you can get your hands on realistic-looking, jaw-dropping floor graphics and decals too. Simply contact Signs West Outdoor today at (702) 879-8250 or use the Get Quote form in the upper right corner of the site.

The photo you see here is a typical adhesive-back floor graphic that was installed over a tile showroom floor.

But did you know, with modern advances in sign printing and floor graphic adhesives, you can apply floor stickers to:

• Tile floors

• Wooden floors

• Linoleum

• Smooth concrete

• Textured concrete

• Asphalt

• Low pile carpet

• Sidewalks

• Even stairs

Depending on your floor type or ground surface and end use, there is an adhesive-back vinyl that will adhere just right.

Plus, all floor marketing signs and graphics are printed directly onto the floor vinyl substrates in full color.

And once your floor ad imagery is printed, a skid-free overlaminate is applied.

The skid-free and slip-free over laminate is to code and is designed to prevent a slippery surface.

And as you can see in the photo above, this floor marketing print has a nice glossy laminate that makes it look like a real wooden basketball court.

At Signs West Outdoor of Las Vegas, we print floor sticker decals for your:

• Special promotions

• Corporate events

• Trade show carpet

• In-store advertising

• Exhibit booth floors

• Business branding

• Outdoor events

• Giveaways

• Transit floor ads

• Big box retail marketing

• Sporting events and more

Plus, there really is no limit to your end use, size, and quantity.

For example, imagine if you’re hosting a 5k or 10k run. You can add no-slip outdoor directional arrows that stick directly onto the concrete and asphalt so runners will know where to go.

And when your event is complete, you simply peel them right back up. It’s that easy.

At the same time, your sponsors can enjoy increased exposure. You can offer to provide your sponsors with printed logo-sticker pavement signs, and then have them applied to the surfaces on or surrounding your course or event.

The best thing about custom-made floor stickers is that you may install these yourself.

How? Simply make sure the ground or floor is free of dust and grime.

Then lay down and align the vinyl floor graphic where you want it to go. It can be one single square or a contour-cut piece (the shape outline of a logo, image, icon, or arrow) if it’s a smaller sticker that is 40 inches in size or less.

Floor decal substrates come in rolls up to 40 inches wide, which means you can have one seamless section at this width. It can be up to 100 feet long, if not more.

However, if it is a huge logo or branded graphic like you see on basketball courts during tournament times, then you can lay each piece down in sections.

Once aligned, you simply peel off the adhesive back and apply the giant floor graphic in sections.

For example, if you have a large 20′ x 10′ contour-cut logo or event-branded floor sticker to align and apply:

• It’s OK to use masking tape to tape down the edge of one section so it acts like a hinge.

• You can then fold the face over (the masking tape holds the edge straight) and peel off the backing.

• Slowly fold back the section over the flooring, going back and forth until the entire piece is in place.

• Then align the next section and tape it down along its edge because the first section is in place and aligned as your starting point.

You can even use a little soapy water mix in case you want to re-align the graphic. Floor vinyl adhesive loves water and heat.

All floor graphics are laminated with a no-slip surface for safety, making them somewhat rigid and easy to work with. The over-lam keeps each piece or section from being flimsy.

If you clean the surface free of dust, use a little soapy water from a spray bottle (2 small drops of dish soap in a spray bottle full of water) and spray the exposed adhesive back before laying down a section or one piece, then you can easily peel it right back up if you make a mistake.

Once in place, use a handheld squeegee, pushing back and forth to remove the soapy water for a nice, clean, smooth look.

Plus, all floor graphic material is designed for easy removal. There will be no leftover residue or damage to your floor.